Bogen Cone Speakers

Hi-Fidelity Ceiling, Easy Install, Ceiling Speaker Assemblies, Wall Baffle, Drop In Ceiling, Surface Mount, Metal Box

High-Fidelity Ceiling Speaker
	HFCS1 • Installs into a variety of ceiling environments including suspended and hard surface ceilings • Large heavy-gauge plated steel back can for deep bass response • Computer-matched dual venting system for full bass output • Wide dispersion coaxial driver provides broad, even coverage • Good off-axis response with smooth contouring • For 16-ohm, 70V, & 100V systems • Off-white finish • Complies with UL-2043 - Report available

High-Fidelity Ceiling Speaker reduced back can depth
HFCS1LP • 6-3/4" mounting depth for installations into a variety of ceiling environments including suspended and hard surface ceilings • Low-profile housing allows greater range of installation depths • Computer-matched venting system for full bass output • Wide dispersion coaxial driver provides broad, even coverage • For 16-ohm, 70V, & 100V systems • Off-white finish • Complies with UL-2043 - Report available

In-Ceiling Subwoofer
CSUB • 8" Woofer provides superior bass reproduction • Installs in suspended ceilings or drywall   • Frequency response: 40 Hz - 125 Hz • Heavy-gauge steel back can • For 8-ohm and 70V systems • Off-white finish

High-Fidelity, Small-Footprint Ceiling Speaker
	HFSF1 • Superior sound in a very compact enclosure (7-1/4" diameter) • Wide-dispersion coaxial driver for broad, even coverage; superb off-axis response • Only 6-1/4" diameter ceiling opening required • Installs in a wide range of ceiling types • For 70V and low-impedance systems • Off-white paintable finish

Drop-In Ceiling Speaker with back can
	CSD1X2/U • Easy assembly saves installation time, effort, and cost • 1' x 2' perforated grille over entire front; off-white or bright white finish • 8" cone speaker with 10 oz. magnet and tweeter, and 25/70V transformer • 5 power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by rotary switch • Tile support rail (included) • Complies with NFPA National Code 160b and UL-2043 - Report available

Drop-In Ceiling Speaker with back can
CSD2X2/U • Easy assembly saves installation time, effort, and cost • Tile support rail for 2' x 4' ceilings included • 2' x 2' perforated grille over entire front; off-white or bright white finish • 8" cone speaker with 10 oz. magnet and tweeter, and 25/70V transformer • 5 power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by rotary switch • Complies with NFPA National Code 160b and UL-2043 - Report available

Drop-In Ceiling Speaker with back can and recessed volume control
	CSD1X2VR/U • Recessed volume control accessible from front of grille • Easy assembly saves installation time, effort, and cost • 1' x 2' perforated grille over entire front; off-white or bright white finish • 8" cone speaker with 10 oz. magnet and tweeter, and 25/70V transformer • 5 power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by rotary switch • Complies with NFPA National Code 160b and UL-2043 - Report available

Drop-In Ceiling Speaker with back can and recessed volume control
CSD2X2VR/U • Recessed volume control accessible from front of grille • Easy assembly saves installation time, effort, and cost • Tile support rail for 2' x 4' ceilings included • 2' x 2' perforated grille over entire front; off-white or bright white finish • 8" cone speaker with 10 oz. magnet and tweeter, and 25/70V transformer • 5 power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by rotary switch • Complies with NFPA National Code 160b and UL-2043 - Report available

Drop-In Ceiling Speaker low impedance with back can
CSD2X2L/U • Easy assembly saves installation time, effort, and cost • 8-ohm, low impedance • 15W maximum power • Tile support rail for 2' x 4' ceilings included • 2' x 2' perforated grille over entire front; off-white or bright white finish • 8" cone speaker with 10 oz. magnet and tweeter • Complies with NFPA National Code 160b and UL-2043 - Report available

Drop-In Ceiling Speaker exposed driver without back can
	CSD1X2NB/U • Exposed driver • Easy assembly saves installation time, effort, and cost • 1' x 2' perforated grille over entire front; off-white or bright white finish • 8" cone speaker with 6 oz. magnet and tweeter, and 25/70V transformer • 6 power taps (4W, 2W, 1W, 1/2W, 1/4W & 1/8W); selectable by stripped and tinned leads

Drop-In Ceiling Speaker exposed driver without back can; with recessed volume control
CSD1X2NBVR/U • Exposed driver • Recessed volume control accessible from front of grille • Easy assembly saves installation time, effort, and cost • 1' x 2' perforated grille over entire front; off-white or bright white finish • 8" cone speaker with 6 oz. magnet and tweeter, and 25/70V transformer • 6 power taps (4W, 2W, 1W, 1/2W, 1/4W & 1/8W); selectable by stripped and tinned leads

Ceiling Speakers
	S86T725PG8U/W & S810T725PG8U/W Assemblies • 4W capacity • 8" cone speaker for excellent audio quality • 6 power taps available (4W, 2W, 1W, 1/2W, 1/4W, 1/8W) • Available with recessed or knob volume control • Pre-assembled for faster installation • Off-white or bright white enamel over steel grille • For 70V & 25V systems

Surface-Mount Speakers Easy Install®/Easy Design Speakers
SM1EZ, SM4T • Fast, easy, clean installation • Direct and reflected sound paths create wide dispersion angle • Lightweight and durable plastic shell with a paintable off-white finish • Complies with NFPA National Code 160b and UL-2043 - Report available • For 25V and 70V systems

Ceiling Speakers Easy Design Speakers
	CS1EZ • 1W, single-tap design • Screw terminal connections for fast installation • For 70V systems • Pre-assembled with 8" cone speaker • Heavy-duty, wire-wound volume control with knob • Off-white enamel over steel grille

Metal Box Speakers
	MB8TSQ & MB8TSL • Rugged all-steel surface-mounted enclosure; off-white finish • Full range 8" cone speaker for excellent intelligibility • Compatible with 25V or 70V amplifier systems • Multiple taps at 4W, 2W, 1W, 1/2W, 1/4W, & 1/8W • 4-watt maximum power output • Available as flat-fronted (MB8TSQ) or with 12.5° angled front (MB8TSL)

Metal Box Speakers with recessed volume control
MB8TSQVR & MB8TSLVR • Recessed volume control • Rugged all-steel surface-mounted enclosure; off-white finish • Full range 8" cone speaker for excellent intelligibility • Compatible with 25V or 70V amplifier systems • Multiple taps at 4W, 2W, 1W, 1/2W, 1/4W, & 1/8W • Available as flat-fronted (MB8TSQVR) or with 12.5° angled front (MB8TSLVR)

Wall Baffle Speakers
	WBS8T725 Assemblies, & WBS810T725 • 4W capacity • 8" cone speaker for excellent audio quality • 6 power taps available (4W, 2W, 1W, 1/2W, 1/4W, 1/8W) • Simulated walnut finish • Available with volume control ("V" versions) • Pre-assembled for faster installation • Works with both 70V and 25V amplifier outputs

Wall Baffle Speakers Easy Design Speakers
WB1EZ • 1W, single-tap design • Screw terminal connections for fast installation • For 70V systems • Pre-assembled with 8" cone speaker • Recessed volume control • Simulated walnut finish